v košíku zboží za 0,-

Váš košík je prázdný.

Nejste přihlášen

IOI FWB-PCIE1X21A PCI Express x1 FW-B 3Port external

IOI FWB-PCIE1X21A PCI Express x1 FW-B 3Port external
Kód: 99200899

1 568,- 1 296,- bez DPH

Výrobce: DeLock
Záruka: 6 měsíců
P/N: 61586

do seznamu


* Host Bus: 1-lane 2.5 Gb/s PCI Express
* Eight (8) isochronous transmit/receive contexts
* Deep 8 Kbyte isochronous transmit/receive FIFOs
* Complies with 1394 OHCI draft 1.2
* Three external 1394 ports
* Bilingual ports with Screw Holes for thumbscrew locking Type 1394b Cable

The FWB-PCIE1X21A combines an OHCI (Open Host Controller Interface) and a high-performance, standards-compliant PCI Express 1.1 host system interface to provide S800 1394b-2002 compliant throughput in a small PCB (Printed Circuit Board) and low power dissipation.

MultipleVCs (Virtual Channels) on the PCI Express link provide native support for QoS (Quality of Service) transmission for real-time and multimedia applications in a standards-based framework, ensuring compatibility with current and future operating systems. Active-state power management allows dynamic power management during periods of reduced network activity.
Technical Specifications
PCI Express:
* Designed for compliance with PCI Express.
* Multiple virtual channel (VC0,VC1 ) support fordiffe-rentiating 1394 isochronous traffic.
* Supports eight user-programmable traffic classes.
* 64-bit and 32-bit platform support.
* Interrupts via legacy INTx interface or message sig-naled interrupt (MSI).
* Supports PCI Express clock power management viaCLKREQN signal for form factors that support thisprotocol.
* Supports all linkpowermanagement states (L0,L0s,L1,andL2/L3) and active state power management(ASPM).
* Supports wake-up from a low-power state via in-bandbeacon signaling and side-band WAKE_N signal.

OHCI (Open Host Controller Interface)
* Enhanced with the OHCI 1.2 draft specification for 1394b-2002 PHY full operational compliance.
* OHCI 1.0 backwards compatible. Configurable via EEPROM to operate in either OHCI 1.0 or OHCI 1.1 mode.
* 8 Kbyte isochronous transmit FIFO.
* 4 Kbyte asynchronous transmit FIFO.
* 8 Kbyte isochronous receive FIFO.
* 8 Kbyte asynchronous receive FIFO.
* Dedicated asynchronous and isochronous descriptor-based DMA engines.
* Eight isochronous transmit contexts.
* Eight isochronous receive contexts.
* Supports parallel processing of incoming physical read and write requests.
* Supports up to 48-bit addressing per OHCI specifica-tion for the physical DMA transfers.

1394b-2002 Link
* Cycle master and isochronous resource manager capable.
* Supports 1394a-2000 and 1394b-2002 acceleration features.

1394b-2002 PHY
* Provides three IEEER 1394b-2002 compliant ports sup-porting 1394b-2002 speeds of 800 Mbits/s and 400Mbits/s while maintaining backward compatibility to IEEE 1394a-2000 speeds of 100 Mbits/s, 200Mbits/s, and 400 Mbits/s over 4.5 m copper.
* Fully supports provisions of IEEE 1394a-2000 and 1394-1995 standards for high-performance serial bus.
* Link is not required for hub operation.
* Supports extended BIAS_HANDSHAKE time for enhanced interoperability with camcorders.
* Does not require external filter capacitor for PLL.
* Supports arbitrated short bus reset to improve utiliza-tion of the bus.
* Supports ack-accelerated arbitration and fly-by concat-enation.
* Supports PHY pinging and remote PHY access pack-ets.
* Fully supports suspend/resume.

Reports cable power fail interrupt when voltage at CPS ball falls below 7.5 V.

Number of Ports:
* Two Bilingual ports with Screw Holes for thumbscrew locking Type 1394b Cable+ One Firewire 1394a Cable Port

Bus Power Connector:
* Big IDE 4-pin DC Power Connector

Operating System Requirements
* Windows 2000/XP//7 and Windows Server 2003
* Mac OS 10.4.8 or later
* Linux 2.6.X

* CE Test: Pass
* FCC Test : Pass
* VCCI Test: Pass
* RoHS Test : Pass

Výrobek je dodáván s manuálem pouze v anglickém nebo německém jazyce.


Parametry výrobku:
Značka DeLock
Typ PCI Express
Stav zboží
Stav Jen nové


Výpis příspěvků:

Nový příspěvek / Odpovědět

Technické specifikace pro produkt IOI FWB-PCIE1X21A PCI Express x1 FW-B 3Port external se mohou změnit bez výslovného upozornění. Obrázky pro produkt IOI FWB-PCIE1X21A PCI Express x1 FW-B 3Port external mají pouze informativní charakter.

Nalezli jste chybu v informaci o IOI FWB-PCIE1X21A PCI Express x1 FW-B 3Port external ?


Hráského 2231/25
148 00 Praha 4

1500x v ČR

© Mironet.cz a.s.

Do kterého seznamu chcete přidat? Seznam A Seznam B